Background

If you want to route duct banks as underground cable routing solution, then Bentley Raceway and Cable Management has a dedicated Duct Bank Router tool. You can configure the spacers, grid, and route the duct banks through this tool.

You can follow the below steps to know how you can route Duct bank inside Bentley Raceway and Cable Management.

Steps to Accomplish

1. Open Raceway drawing and select Duct Bank Router from the Underground System.
   
   
   
2. Duct Bank Router dialog will open and after configuring the grid and spacers you can select the System as shown in the image.
   
   
   
3. Select a Catalog from the drop down menu.
   
   
   
4. Configure all the remaining properties for the conduits.
   
   
   
5. Now open ID Settings and configure ID for the Ductbank.
   
   
   
6. In the Preferences tab you can configure the part preferences from the number of selections in the drop down menus.
   
   
   
7. You can disable the Preference Set, if you don’t want to use it.
   
   
   
8. Now, click Route and route the duct bank as required.
   
   
   
   
   
9. Since Bentley Raceway and Cable Management CONNECT Edition Update 10, you can also select Cable Routes as raceway system..
   
   
   
   
   

See Also

Still a Problem?

If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround.

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!