How to Generate Reports based on Size in OpenPlant Isometrics Manager Connect

Applies To
Product(s):	OpenPlant Isometrics Manager
Version(s):	CONNECT Edition 10.09.00.74 (Update 9)
Environment:	Windows 7/8.1/10 (64 bit)
Area:	Settings/Attributes
Subarea:	Configuring the BOM and Reports
Original Author:	Aishwarya Kulkarni, Bentley Product Advantage Group

Background

Depending on different use case scenarios, some users want to extract various report types based on "Size" and wanted to generate BOM separately e.g. reports as Owner/Contractor BOM list. Please refer to the settings below in the report.def file. This will aid the user to achieve the desired configuration. The example referenced below has been considered to display to separate BOM, OWNER/CONTRACTOR, where OWNER BOM falls for size < (Less Than) 8 Inches and CONTRACTOR BOM shows for Size>= 8 inches. Also to maintain the Item ID in both the BOM reports.

Steps to Accomplish

Open the file explore. For the opening of report.def file, please use below mention path.

C:\ProgramData\Bentley\OpenPlant CONNECT Edition\Configuration\Workspaces\OpenPlantExample\WorkSets\Metric\Standards\OpenPlant\Isometrics\styles\IFC\config
Open the report.def file in the notepad as per your required workset as shown below.
Use format as outlined below:.
Save and Close the report.def file and generate Isometrics to verify results.