Background

In OpenPlant Isometrics Manager generated Isometric, spool ends type (SW, BW, PL, SCREWED) information is important for fabrication purposes. By default ends type information is not populated in the Isometric cut list, but the following steps will guide how to add end types in the cut list.

Steps To Accomplish

1. Navigate to the project path and open the required style's "config" folder in which all style's configuration files are stored. By default this folder can be found at these locations:
   
   C:\ProgramData\Bentley\OpenPlant CONNECT Edition\Configuration\WorkSpaces\OpenPlantExample\WorkSets\Metric\Standards\OpenPlant\Isometrics\styles\IFC\config
   
   
2. Open report.def file
   
   
   
   
3. Add entry of two new COLUMN entries to show "CM1" and "CM2" attributes.
   
   
4. #-----------------------------------------------------------------------------
   # The CUT report lists the pipe cut pieces
   # Attaches to text node 61
   #-----------------------------------------------------------------------------
   REPORT = CUT
   INCLUDE = IE_TYPE=CT_PIPE|CT_BEND
   COLUMN = 6:C:CUTID
   COLUMN = 7:R:SIZE1
   COLUMN = 21:R:QUANTITY
   COLUMN = 3:R:
   COLUMN = 80:W:IE_DESCRIPT
   COLUMN = 10:W:CM1
   COLUMN = 10:W:CM2
   GROUP = CUTID
   SORT = CUTID
   NODE = 61
   END
   
   
   
5. Generate isometric and verify result.
   
   
   

See Also

http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/12642.configuring-the-bom-and-reports

Still a Problem?

If the above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround