You are currently reviewing an older revision of this page.
OpenPlant Modeler Connect Edition Update 10 is going to offer ProStructures as Add in along with OpenPlant product itself. This feature will allow users to use ProStructures along with OpenPlant Modeler in OpenPlant Modeler product itself.
But if users are using Update 9 and do not want to upgrade to Update 10 due to projects need, but wants this ProStructures to be enabled, they can do so by doing some changes in Workspace and Workset Configuration files.
This document will explain how one can enable ProStructures as seperate License even in Update 9.
In Update 9, the Structural workflow was in the form of SMC and the Ui looks like below with all the SMC tools.Whereas in Update 10, there is introduced one ProStructures switch along with some common tools in the UI itself. Also this addition has replaced the SMC. This looks like below.
Following steps one needs to follow in WorkSpace and WorkSet Configuration files.
(A) Step-1: Addition of lines in WorkSpace.cfg fileNavigate to path "C:\ProgramData\Bentley\OpenPlant CONNECT Edition\Configuration\WorkSpaces" and do the following changes in the available WorkSpace.cfg files#--------------------------------------------------------------# Defining product based standard so products can share data #--------------------------------------------------------------OPENPLANT_WORKSPACE_STANDARDS = $(_USTN_WORKSPACESTANDARDS)OpenPlant/PROSTRUCTURES_WORKSPACE_STANDARDS = $(_USTN_WORKSPACESTANDARDS)ProStructures/(B) Step-2: Addition and Deletion of lines in WorkSet.cfg file