Background

Insertion point for conduits by default set to the lower left conduit of the grid. In Bentley Raceway and Cable Management CONNECT Edition Update 10, user has the option to set the insertion point at the center by using the new Align Center setting. You can follow the steps of this WIKI article to align the insertion point to the center while placing conduits.

Steps to Accomplish

1. Open Raceway Router from Raceway ribbon tab.
   
   
   
2. Select System as Conduits and setup a 4x4 or 2x2 grid.
   
   Note: The offset Z value is taken automatically and if you route conduits with these setting, it will take the insertion point at lower left conduit’s center.
   
   
3. Click on Raceway configuration and select Setup grid.
   
   
   
4. Check the Align center to activate the settings.
   
   
   
5. The Offset Z value will get set to align the insertion point at center.
   
   
   

See Also

Still a Problem?

If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround.

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!