In Bentley Raceway and Cable Management (BRCM), the AutoPlace Conduit tool enables to connect conduits from raceway system or trench system to equipment.In addition to that, conduits can also be generated between equipment to equipment with the enhancement in AutoPlace conduit tool. This article explains how to automatically generate conduits between equipment using the AutoPlace Conduit tool.
1. Launch the application and create a new .dgn file and register it as 3D model, Equipment * Raceway. 2.Using the Equipment Manager, place equipment (Panel) in the .dgn file. 3. Go to Raceway tab and click on AutoPlace Conduit. Select AutoPlace Conduit-Equipment to Equipment for generating conduits between the placed equipment.4. Input the offset from source equipment and select the source equipment and again click to accept the selection.5. Keeping the same offset value select the target equipment, and click to accept the selection.6. Raceway Properties dialog will be displayed. Select the System as Conduits and select the Catalog and Variant for the Conduit. Click OK. 7. The conduits will be automatically generated with the provided offset between the equipment.Refer to the short video-
If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround.