You are currently reviewing an older revision of this page.
CONNECT Edition 10.10.00.72
In OpenPlant Modeler CONNECT Edition, while placing a component, it needs to be selected from the spec grid if more than one record is available. In that grid, the sequence of properties is set by default as shown
For Weld Neck Flange the sequence is Name > Nominal Diameter > Manufacturer > Schedule > Rating > Description > Fluid Port Facing > Fluid Port End Prepe > & So on...
Now, the requirement is to change this default sequence to desired one.Let's say for example, the sequence should be changed as shown
Nominal Diameter > Name > Description > Manufacturer > Fluid Port Facing & disable the Fluid Port End Preparation & Nominal Diameter.
This wiki article explains how this can be set.
Note: If, in case relaunching the OpenPlant Modeler didn't reflects back the results. Please delete the OpenPlant Modeler folder from
C:\Users\%USER_NAME%\AppData\Roaming\ & C:\Users\%USER_NAME%\AppData\Local\
If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround