Background

Output generated by OpenPlant Isometrics Manager shows the uneven distance from the component and dimension witness line. Normally Uneven distance is observed when components have different end conditions.

Steps to Resolve

1. Navigate the isometric style path and open Style.cfg file in Notepad.

            For ex: C:\ProgramData\Bentley\Plant V8i\Bentley Plant V8i Projects\SAMPLE_METRIC\Config\OpenPlant\Isometrics\styles\IFC\config 

2. Add the following lines under # Dimension witness line offset for centerline for a given EndPrep section.

                DimLift_FL = 10

                DimLift_IF = 10

                DimLift_BW = 10

                DimLift_FT = 10

                DimLift_SW = 10

                DimLift_FW = 10 

                Review the End Condition and then add the missing End Conditions.
                
            

3. Save the file and generate an isometric to review the result.
   

See Also

Still a Problem?

If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround. 

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!