Overview

To Resolve if there is no Workspace and Workset Visible While Launching OpenPlant Modeler

Problem Description

While Launching OpenPlant Modeler, notice there is no Workspace and Workset available to select. It is observed that there is no configuration (*.cfg) file available for this workspace. See image below.

Steps to Resolve

Case-|

1. Open windows explorer and navigate to the project where it is being installed and carefully evaluate whether the supporting configuration file available, notice that there is no OpenPlant Example.cfg file available so here is the step to resolve.
   
   Navigate to the default Installation Path -> C:\ProgramData\Bentley\OpenPlant CONNECT Edition\Configuration\Workspaces
   
   
   
   
   
   
   
2. To re-install OpenPlant Modeler, if*.cfg file is not present in the default location or paste the available configuration file in a suitable path.
   
   
3. Re-Launch OpenPlant Modeler and verify that workset is visible for particular workspace.
   
   

Case-||

1. If issue is still not solved, Go to Example configuration path and check for variable USTN_INSTALLED _CONFIGURATION present in below location.
   
   Navigate to the Path: C:\Program Files\Bentley\OpenPlant CONNECT Edition\OpenPlantModeler\config
   
   
   
   
   

If above problem still persists, then please create a Service Request and contact the Bentley Global Technical Support.  Please include a list of all relevant details to get in depth analysis for a solution or workaround.

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!