10.11.00.213 and above
To set the PlantSight setting so that the changes made in a Pipe Run can be synced with other drawing having same Pipe Run connected through Page Connector.
When changes are done in a Pipe Run which goes through multiple drawing via page connector, the Sync operation performed does not carry the changes made in one drawing to other drawing, but it considers the value as old value and replace it with blank value as per current drawing.
Steps to Resolve
2. Under Synchronization Setting do the selections as per mentioned below.
Note Above setting means
To test this workflow
2. Click on Sync option.
3. The difference dialogue will appear, click Update, the drawing data will get compared with PlantSight data and it will sync/ overwrite the data to PlantSight.
4. Create a new drawing PS_02.dgn. Select Connector Click on Pipe Run Page, select on Existing Page Connector, enable document Filter, select the drawing created earlier PS_01, select pipeline and click ok.
5. Click on yes, this option will continue the existing Pipe Run which was created in PS_01
6. Place the Page Connector and make the arrangement as show below.
7. Select Page Connector and right click on it, click on Follow.
8. As per the selected Sync setting in earlier steps the drawing will get sync and will get updated as per the data available at PlantSight when click on Update.
9. Make some changes in the Pipe Run properties like change size from 4” to 6” and few other changes as shown below.
10. Perform Sync Operation and update the changes.11. Right click on the Page connector and follow.12. The Drawing will get sync and difference dialogue will show the changes made in Pipe Run properties as shown below. Click on Update.
The Old Value is from the current drawing and the New Value shows the changes made in connect drawing.
13. The Pipe Run Properties will get updated in PS_02, as per the changes made in PS_01
If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround