How to Create Special Stamps using Detail Sketches in OpenPlant Isometrics Manager in CONNECT Edition

Overview

User is using some components for which special information like Stamp informing about those components should be added in generated isometrics model. Whole this process should be automated and if drawing contains those special components, then required stamps always should be placed in Isometrics.

Steps to Accomplish

In below steps we will try to explain how to create special stamp for Stud Bolts by using cells from detail_sketch.cell file

1. Open Project Administrator. Select Root and Project, Settings, and Isometric Styles.
   
2. Choose Isometric Style, select Style Config Root and select detail_sketch.cel
   
   
3. In Primary, select Models.
   
   

   Copy Sample Detail Sketch and provide a name (example: Test1).
   
   

   Create a Stamp and Save
   
4. Open BOLT table in required specification. In Design View, add DETAIL under Field Name.
   
5. Open BOLT table again and filter required STUD BOLTS of 1 and smaller main size.
6. In DETAIL column, type Test1 as the name of model for the stamp created earlier.
   
7. Save all changes and close the files. Generate Isometric Model and check the stamp.
   
8. If Detail Sketch labels are not required, it can be disabled in User Labels in Isometrics Configuration dialogue.
   

See Also

Comments or Corrections?

Bentley's Product Advantage  Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!