Overview

To Resolve the Bolt Length Conversion Issue in OpenPlant Isometric Manager

Problem Description

While Generating an Isometric through isometric extractor user observed that in the Bill of Material of isometric sheet the Bolt Length has been converted with the factor of 25.4. In the below image observed that the 125 mm bolt length has converted to 3175 mm bolt length. To resolve this issue please follow the below steps.

Steps to Resolve

1. Try to Generate an isometric of same pipeline in which issue has occurred and go to style editor as shown in image below.
   
   
   
   
2. Click on style editor and open work root directory.
   
   
   
3. Go to config and open file override.txt.
   
   
   
   
   
   
4. Write this rule on this file and save and close. And re-generate an isometric to verify the result.
   
   RULE: Make bolt lengths look like metric  
   

   INCLUDE = EC_CLASS=STUD_BOLT

   @@SIZE2 = BOLT_LENGTH:#
   
   
   
   

Still a Problem?

 If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround.

Bentley's Global Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!