There are some instances when generated isometrics of elbows connected consecutively will form a triangular shape which results graphically wrong. To generate this correctly, kindly follow the steps below.
1. Launch OpenPlant Modeler and open the piping model.2. Apply a value in any of the properties in the elbow. For example, use Paint Code. Put a value of 1 for the first and second elbow.3. For the third elbow, leave it blank.4. Open overrides.txt and apply the given values below.RULE: Three Elbows INCLUDE = PAINT_CODE = 1Scale = 25. Generate isometrics to verify results.
AutoPLANT - OpenPlant Isometrics Manager CONNECT Edition OpenPlant Isometrics Manager CONNECT - AutoPLANT See Also AutoPLANT Modeler CONNECT Edition Work remotely or connected with the market’s most productive and easy-to… Last edited over 3 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki
If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround.
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!