Single Place method:a. Select Single Place option.b. The Raceway Manage Equipment dialog box appears.
Note: You can define the Angle of the support.c. Select Cursor Position button to place the support at the cursor point.
Click the desired point on the raceway you want to place the support.
Multi Place method:a. Select Multi Place option.b. The Support Spacing Configuration dialog box appears.c. (Optional) Edit the values in the Spacings tab and click "OK".
d. (Optional) Toggle the "Using segment place" checkbox to place the support along a raceway segment.
Toggle off the "Connect to ceiling" checkbox if you wish to connect the supports with floor.e. Select the raceway you want to place support.f. Follow the prompts from the Message Center like select the direction of the support, accept raceway, etc.
g. The raceway placement dialog displays.
The support is placed along the raceway.
Single Place method:
Multi Place method:
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!