How To Use the Fence Stretch Command in OPPID


 Applies To OpenPlant CONNECT Edition
 Product(s):OpenPlant PID
 Version(s):CONNECT EDITION (10.11.xx)
 Environment: Windows 8.1/10 (64 bit)
 Area: Component
 Subarea: Stretch
 Original Author:Joseph Gelacio, Bentley Product Advantage Group

  

Background

You can use Fence Stretch functionality to stretch OpenPlant PID Pipe Runs and Instrument Lines.
When using this option only the Pipe Runs or Instrument Lines are stretched, while the other components included in the fence are simply moved.

Steps to Accomplish

  1. Click the Place Fence icon.


  2. In the Place Fence dialog, select one of the following options as a Fence Type:
    • Block
    • Shape
    • Circle
    • From View

    These are the only options that should be used when utilizing the Fence Stretch command.

    Note: The Fence Mode doesn't really matter here as the Fence Stretch command always uses the Overlap mode.

  3. Place the fence around the desired elements.


  4. Select the Manipulate Fence Contents option from either the Tools > Selection menu, or the Selection toolbar.


  5. Make sure the Stretch Cells option is not checked and select the Stretch   icon.

  6. Pick a point on the fence or anywhere with as the first point.

  7. Pick the second stretch point. The result is the pipe run is stretched and the other components, inside and/or overlapping the fence are moved.

The scenario above represents a simple stretch of a pipe run with inline components on it. There are several scenarios where the rerouting of pipe runs to maintain connectivity become more involved and may require some cleanup process to get the pipe runs routed the way you want.

Another common scenario which involves a Fence Stretch is moving inline components with multiple run segments as illustrated below.

In this example, the top horizontal run segment stretches, becoming longer. The valve in that segment moves to the right. The vertical run segment with its ball valve simply shifts to the right and the bottom horizontal run segment becomes shorter.


If you use the scenario above, except you stretch the fence past an inline component (in this case the control valve) which is not part of the fence as shown below:


The vertical run, which is part of the fence and includes the ball valve, is shifted to the right. An additional horizontal run segment is added to maintain connectivity with the shifted section of the vertical run.

Note: In situations like these, it is up to you to clean up the results when resulting runs overlap other components.

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!