Applies To
Product(s):	OpenPlant Modeler + OPPID + Plantsight
Version(s):	CONNECT Edition 10.11.++
Environment:	Windows 10/11 (64-bit)
Area:	OPM-PID-Plantsight
Subarea:	Setup
Original Author:	Nikitesh Kawana, Bentley Global Technical Support

Background

This wiki will help us to understand how we can setup OPPID, OPM & Plantsight in connected environment so that we can push and pull information from one product to other.  

Prerequisite-

Install -          OpenPlantProject Administrator

                        OpenPlant PID

                        OpenPlant Modeler

Access to-     Plantsight

 

Steps to Accomplish

1. Start Open Plant Project Administrator à Connect Services Tab àPlantsight à Register a facility à Register a Project à Create a iModel
   
   
   
   
   
   
   
   
2. Again go to Go Open Plant Project Administrator à Connect Services tab & In Configuration tab, OpenPlant Connect Edition\ Configuration\ à Workspace (in my case OpenPlant Example) à Workset (In my case Metric) & Click on Associate & select Project to be associated with Workset
3. Click on Setup button and select iModel & establish connection between workset and iModel
   
   
   
   
4. Check if correctly connected in Open Plant Project Administrator(OPPA)
   
   
   
   
   
5. 1. Now in this case Workflow of Information can be in two formats

   Case 1

                  In this case Information is first Created in EDM and then pushed to OPM & OPPID, if some changes are made in OPPID it can be synced to EDM.

   

   Case 2

   In this case Information is generated in OPPID and then pushed to EDM and OPM.

    

See Also 

communities.bentley.com/.../how-to-add-the-reattach-instrument-bubble-and-annotation-option-in-the-openplant-pid