To Modify the Spool ID Labeling in OpenPlant Isometric Manager Connect Edition


Applies To
Product(s):OpenPlant Isometric Manager
Version(s):CONNECT Edition (10.11.0.175)
Environment:Windows 10 (64 bit) & Above
Area:Settings / Attributes
Subarea: Annotation / SPOOLID
Original Author: Chanchal Mashalkar, Bentley Global Technical Support

Overview

To label the Spool ID in OpenPlant Isometrics Manager, through OpenPlant. Various syntax can be achieved using the attributes of OpenPlant Isometrics Manager and with 'User Labels' option through Isometrics configuration dialog box.

Problem Description

Requirement was to achieve the Spool ID label with syntax like LINENUMBER-NUMBER/LETTER of a spool. Matching attributes can be used to customize the 'Pipe Spool Labels' option present under 'User Labels' node in Isometrics configuration dialog. Below are the recommended way to achieve it.

Steps to Resolve

User can customize the Line number labeling under ‘User Labels’ option present in Isometrics configuration dialog box. Currently under ‘Pipe Spool Labels’ it has been defined as $(SPOOLID). 

  1. Launch OpenPlant Modeler in the Project setting.

  2. Generate the isometric for particular pipeline.

  3. In the iso-extractor dialog box go to the style editor as shown in the image below.



  4. From Isometrics Configuration dialog box, open seed file as shown.



  5. Open ‘Annotation’ DGN file to edit the SpoolID table from Cell Template as shown.



  6. Under Notes table, copy SPOOLID cell below the table. Delete the Text Spool: from the box.



  7. Place fence around the box and save the new cell to custom.cell.





  8. Save settings and close cell template DGN file.

  9. From ‘User Labels’ tab rename the pipe spool labels Spool: $(LINENUMBER)-2$(CUTID).



    Note: Also using one extra '$' marks you can change the row of it. In below referred link under 'See Also', it has been explained. 


  10. Attributes, which are present under 'Show Component Tag'. See below for reference. While writing the labels, it is always good to check those attributes and define it accordingly to avoid any mistakes. 



  11. Save Settings and generate isometrics and verify results. See below image.

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!