Applies To | |
Product(s): | OpenPlant Modeler CONNECT Edition Update 11.1 |
Version(s): | 10.11.01.161 |
Environment: | Windows 10/11 (64 bit) |
Area: | List of Fixes |
Subarea: | Document |
Original Author: | Bentley Product Advantage Group |
Bug No. | Description |
265919 | HVAC components doesn't retrieve data from the spec |
265922 | HVAC round transition only picks concentric type reducer records from the spec. |
265923 | HVAC Saddle Tee doesn't pick records from the spec |
1021724 | HVAC component from catalog modification get exception error |
1021837 | HVAC autofitting don't get fitting component from spec |
1021842 | HVAC component don’t get related hvac property populated if hvac spec is not used |
1021850 | Spec field shows incorrect info for generic components |
1053333 | HVAC component's property values are not getting saved via modify component for using "mHVAC Rect" spec |
1057814 | Modify design property (Width or Height) to non-spec value and switch back to spec value doesn’t update the component name to mHVACRect |
1057904 | AutoMatch or Match options are not retrieving matching properties for component placement while using "mHVAC Rect" spec and “Component Compatibility Check Failed” appears |
1058081 | Save changes button remains enabled even in case of applying save by giving non-spec value for Main Width/Height in Modify Component dialog for mHVACRect spec |
1058127 | Ports mismatch Error appears in Message Center and unable to place Rectangular Damper inline to Rect Duct for using mHVACRect spec |
1170630 | Apply changes remains active on applying Save Changes for properties for HVAC components |
1170844 | mHVACRect spec name is incorrectly displayed on placing non-spec HVAC Component |
1197998 | HVAC Generic elbows are recognized as Spec component when placed via autofitting |
1225091 | HVAC Line Manager performance Issue. |
1230539 | Elbow is not getting placed as spec component even if it is present in the spec |
1231803 | HVAC Generic elbows are recognized as spec component when placed via Autofitting in case "autofitting generic component flag" is off/false |
1274157 | Unable to place HVAC transition from spec through Autofitting. |
1055763 | Long time taken for Check-In procedure to PlantSight for 3D Models |
Please also visit Release Announcement Page for highlights of the release.
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!