Applies To | |
Product(s): | OpenPlant Isometrics Manager CONNECT Edition |
Version(s): | 10.XX.XX.XXX |
Environment: | Windows 10 (64-bit) |
Area: | Settings/Attributes |
Subarea: | Modifying Symbols |
Original Author: | Evander Cabalagan, Bentley Global Technical Support |
On this scenario, the user changed the Part ID from square/box into circle. The issue appears when the Part ID becomes double digit. As a result, the Part ID bubble size gets bigger than usual. Kindly follow the steps below to obtain bubble size consistency.
1. Open custom.cel and search for PARTID.
2. Rename PARTID. For example, CPARTID.
3. In Part ID Labels, update the value in Cell to be Used to CPARTID. In addition, check the Use Prefix to update the B,G, F and other values.
4. Generate the isometrics to verify the result.
5. In case the Part ID overlaps with the circle, open again the custom.cel.
6. Select the circle and adjust the size until it tangents the circle.
7. Generate the isometrics again.
communities.bentley.com/.../modifying-symbols-for-autoplant---openplant-isometrics
If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround.
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!