How to Resolve the Error while opening the OP Schema in Bentley Class Editor?


Applies To
Product(s):Bentley Class Editor
Version(s):CONNECT Edition (10.11.00.180) & Above
Environment:Windows 10/11 (64 bit)
Area:OpenPlant Schema
Subarea: OpenPlant 3D Schema / OpenPlant PID Schema
Original Author: Chanchal Mashalkar, Bentley Global Technical Support

Problem Description

In Bentley Class Editor tool (which is helpful for defining the Schema for OpenPlant Products) shows an Error while opening the OP Schema as shown in the image below.
The issue has observed while opening the OpenPlant 3D or OpenPlant PID schema followed by OpenPlant Schema.
It has observed that, in Bentley Class Editor, Schema is following the sequence, while opening it.
Below are the steps to resolve the error occurred.



Steps to Resolve

  1. Launch Bentley Class Editor

  2. Open OpenPlant Schema and then Other one (OpenPlant 3D or OpenPlant PID as needed) always.

  3. In addition to that to avoid such kind of error, download the Bentley Class Editor V8i.

Still a Problem?

 If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround.

Comments or Corrections?

Bentley's Global Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!