You are currently reviewing an older revision of this page.
Document Type: TechNote Product(s): AutoPLANT Version(s): V8i SS3 08.11.08.123 & 08.11.08.151 Original Author: Bentley Plant Technical Support Group
Document Type: TechNote
Product(s): AutoPLANT
Version(s): V8i SS3 08.11.08.123 & 08.11.08.151
Original Author: Bentley Plant Technical Support Group
There is a know issue, which occurs because PW Explorer V8i (SELECTseries 3) is a 32-bit application and additional configuration is required for it to work correctly with a 64-bit AutoCAD 2010 or 2011 application.
Only ProjectWise V8i (SELECTseries 3) is compatible with 64-bit version of AutoCAD.
To enable ProjectWise Explorer V8i (SELECTseries 3) to work with 64-bit versions of AutoCAD the following steps must be followed:
Note: The .reg files described above contain updates for AutoCAD installed into the default, out-of-the-box location. If your AutoCAD installation is to a non-default location, the contents of these .reg files must be edited to suit.
Product TechNotes and FAQs
Plant TechNotes And FAQs
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to the "Comments" area below. THANK YOU!