Applies To
Product(s):	OpenPlant Isometrics Manager CONNECT Edition
Version(s):	10.XX.XX.XXX
Environment:	Windows 10 (64-bit)
Area:	Settings/Attributes
Subarea:	-
Original Author:	Evander Cabalagan, Bentley Global Technical Support

Background

There is a scenario where pipe is the only component showing in continuation. In addition, there are several components that must be visible in generated isometrics. The goal is to regulate or control the number of continuing components.

Steps to Accomplish

1. Generate isometrics of the given piping model.
2. In isometrics configuration box, select Launch Project Configuration.
   
3. Locate Isometric Continuity Options. Change the value of last continuing components to BLIND_FLANGE. The chosen value is the last component in the model and serves as the limit.
   For max iso continuing components, the numerical value stands for the arrangement order. For instance, Weld Neck Flange B is at number 6. Hence, the continuation will be up to Weld Neck Flange B in generated isometrics.
   
   
4. Another example, set the max iso continuing components value to 9. The result of continuation will be up to Blind Flange in generated isometrics.
   
   
5. Repeat the process by changing the numerical value to regulate the appearance of continuing components.

See Also

communities.bentley.com/.../processing-openplant-isometrics-manager

Still a Problem?

If above problem still persist, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround.

Comments or Correction?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!