4. How to use AccuSnap Working with Multi-Snaps?


 

 

 

Applies To 

 

 

 

Product(s):

OpenPlant 

 

Version(s):

Connect

 

Environment: 

Windows 11 64 bit)

 

Area: 

AccuSnap

 

Subarea: 

 

Original Author:

Carlos De la Torre, Bentley Global Technical Support Group

 

Background

When a multi-snap mode is active (by default or override), AccuSnap processes the snaps in the order they are listed. AccuSnap selects the first snap mode in the list that is a candidate and on the target element. If none of the snap modes are candidates or on the target element, AccuSnap chooses the nearest to the cursor.

Note: Center is an example of a snap that can be a candidate but not on the target element.
Note: Snaps displayed in the Multi-snap Settings dialog are listed in the order in which they are processed by AccuSnap. The order of the snaps can be changed by clicking on a snap mode and dragging it up or down in the list.

See Also


OpenPlant Modeler CONNECT - OpenPlant | AutoPLANT Wiki - OpenPlant | AutoPLANT - Bentley Communities

 

Comments or Corrections?

Bentley's Global Technical Support group requests that you please confine any comments you have on this Wiki entry to Forum section? section. THANK YOU!

https://communities.bentley.com/products/plant/f/autoplant-axsys-openplant-plantwise-forum