Applies To
Product(s):	OpenPlant Modeler
Version(s):	CONNECT Edition Update 11 (10.11.++)
Environment:	Windows 10/11 (64 bit)
Area:	Tools
Subarea:	Language
Original Author:	Nikitesh Kawana, Bentley Global Technical Support Group

Overview

If in OPM some tools are shown in multilanguage, than this article may be helpful

Problem Description

Some users may face issue of Tools shown in Multi language, without making changes to Configuration language settings

          

Steps to Resolve

This may be due to Old GUI.dgnlib files being used 

1. Start OPM and check if options are shown in Multi language 

2. Get OOTB GUI.dgnlib file and replace it at 

3. C:\ProgramData\Bentley\OpenPlant CONNECT Edition\Configuration_OOTB\WorkSpaces\OpenPlantExample\Standards\OpenPlant\Dgnlib 

4. Restart the product and check

See Also

 communities.bentley.com/.../errors-logs-messages-crashes-in-connect---openplant-isometrics-manager   

Still a Problem?

If above problem still persists, then please log a Case and contact the Bentley Global Technical Support group.  While logging a case, please include all relevant information to get in-depth analysis for a solution or workaround. 

 Link to log a case is available Here>>>

Comments or Corrections?

Bentley's Global Technical Support group requests that you please confine any comments you have on this Wiki entry to Forum section? section. THANK YOU!

 communities.bentley.com/.../autoplant-axsys-openplant-plantwise-forum