Applies To | |
Product(s): | OpenPlant Modeler |
Version(s): | CONNECT Edition Update 11 (10.11.xx.xxx) |
Environment: | Windows 10/11 (64 bit) |
Area: | Reports |
Subarea: | BOMbylineno |
Original Author: | Nikitesh Kawana, Bentley Global Technical Support Group |
In OpenPlant Modeler when report is generated by BOMbyLineno, then values turn come up with NA, to resolve same, this article can be useful.
If in reports out of BOMbyLineNo is generated and values turn into NA then following steps may help to resolve the issue
1. Verify schema if there are any properties that get override
2. If there is override, remove those override
3. Save schema and verify results, notice if value in size column are correct.
4. In case there is still an issue, then please register a case along with relevant files and connect with Bentley Global Technical Support
See Also
communities.bentley.com/.../errors-logs-messages-crashes-in-connect---openplant-isometrics-manager
Still a Problem?
If above problem still persists, then please log a Case and contact the Bentley Global Technical Support group. While logging a case, please include all relevant information to get in-depth analysis for a solution or workaround.
Link to log a case is available Here>>>
Comments or Corrections?
Bentley's Global Technical Support group requests that you please confine any comments you have on this Wiki entry to Forum section? section. THANK YOU!
communities.bentley.com/.../autoplant-axsys-openplant-plantwise-forum