How to Accumulate same type of elbows in a single line with description in Isometrics BOM


Applies To
Product(s):OpenPlant Isometric Manager
Version(s):CONNECT Edition Update 11 (10.11.xx.xxx)
Environment:Windows 10/11 (64 bit)
Area:BOM
Subarea:
Original Author:Niyati Parate, Bentley Global Technical Support Group

Background

In OpenPlant Isometric Manager if user wants all the same type elbows accumulated in a single line with description in Isometrics BOM then following steps may be helpful.

Steps to Accomplish

  1. Open Class editor
  2. Open ‘OpenPlant_3D_Supplemental_Isometrics_Isoextractor.01.08.ecschema’
  3. Locate the "PIPE_ELBOW" class to edit the schema.
  4. Go to Class tab, under "Isometric Component" custom attribute, Remove the value "this.GetClass().Name & " from item code field and keep the item code as shown in the below image.



  5. Save & close the schema.
  6. Launch OpenPlant Isometrics Manager and verify results. Before making schema changes elbows were coming like this (refer below image) in BOM 

    Now after making schema changes, elbows are accumulated in BOM. Refer below image.

            

         7.If following steps do not help, then reach out Bentley Global Technical support team with details by logging a case.




          

See Also

 OpenPlant Modeler CONNECT 

 Link to log a case is available Here>>>

Comments or Corrections?

Bentley's Global Technical Support group requests that you please confine any comments you have on this Wiki entry to Forum section? section. THANK YOU!

 OpenPlant | AutoPLANT Forum