Project Curve to solid

Hi Christiaan

Yes, but you will need to extract the surface you want to project on first and if that meshy looking element is your solid, it might not be so nice. 

Attached is a DGN done with OpenBuildings Update 7. Also GCT if this is not version friendly. 

ProjectOnToSolid.dgnhttps://communities.bentley.com/cfs-file/__key/communityserver-discussions-components-files/360/ProjectOnToSolid-_2D00_-GC-Backup-01-_2800_Newest_2900_.gct

Stuart

Hello Christiaan,

I hope you are doing fine.

You have to extract a surface from the solid in which you need to project. Then you can project the curve on the extracted surface. Finally you an loft between two curves to create the surface.

I have attached the .dgn file 

solid.dgn

It looks like Anik and I got to it at the same time. 

Thanks  a lot, and that meshy looking thing is coming from Revit as IFC file 

Yes, thanks a lot