命令框中用 bmake -a 能够通过,但是用vs 自动生成失败提示如图
然后尝试采用国外部工具的方式 出现以下错误
Hi
I will be happy to assist you. Please send an image of the output window showing the error(s) to mailto:support@innovocad.com. This will tell me where the error is occurring. The tool you are using, unlike the currently published tool, is using NMake project settings. All settings are defined when Visual Studio loads as Visual Studio macros.
These settings are set through the Visual Studio options page. Go to Tools\Options... Select the Bentley leaf and then the MicroStation CONNECT Edition leaf. Verify that your settings are set correctly. If behaving as expected, you should get a clean build as shown. But that does not mean anything if the app is not setting up your Visual Studio correctly. If you email me at the above email address, we can continue to discuss and come to a resolution. We can then post the resolution back here.
Also note the currently published tool uses a Visual Studio build using a dynamic library project settings and uses a Post Build Event to create the associated .ma file using BMake. You can update the tool and see if you can successfully build an app. I would still like to see the Output Window to determine error. Please contact me at the above email address and will discuss further.
Update: I assume you are using Visual Studio in administrative mode with write access to the mdlapps folder.
Thank you
Marty Robbins