ProjectWise Publishing Wiki Media is trimmed at a standard size regardless of the plot size.

Media is trimmed at a standard size regardless of the plot size.


	Applies To

	Product(s):	ProjectWise InterPlot Driver Pack
	Version(s):	N\A
	Environment:	N\A
	Area:	General
	Subarea:	N\A
	Original Author:	Todd Combs, Bentley Technical Support Group

When using a wide format Bentley plotter driver, the media is trimmed at a standard size regardless of the plot size. The desired trimming is at the end of the image.

Solution:

Use the Graphical Attribute Editor to reconfigure the Cut method to Synchro.

· On the InterPlot server select Start > All Programs > Bentley > ProjectWise InterPlot Utilities > Graphical Attribute Editor

· Select File > Open Default > select the Printer > OK

· Change the Cut Method from Standard (default) to Synchro

· Select File > Save as Default, answer Yes in the Information dialog

Cut Method

Standard – the driver cuts the plot at the best standard size.

Synchro – the driver cuts the plot at the end of the image.

Custom – the driver cuts the plot at a user-defined length. This command is used with the Cut length control.

Created by Todd Combs
When: Wed, Sep 10 2014 11:28 AM
Last revision by Dana Guthrie
When: Tue, Dec 6 2022 2:50 PM
Revisions: 3
Comments: 0

Recommended