The table below is a list of the AutoCAD commands that are integrated with ProjectWise. These commands are supported on all versions of AutoCAD where the command is recognized.
Integrated Command
Command Description
Version Introduced
DMSNEW
Creates new document
Pre-XM
DMSOPEN
Opens document from ProjectWise
DMSQSAVE, DMSSAVE
Saves current document
DMSSAVEAS
Saves current document as new document
DMSQUIT
Closes AutoCAD and all opened documents
DMSINSERT
Inserts block from ProjectWise into a drawing
DMSWBLOCK
Saves block to file in ProjectWise
DMSEXPORT
Exports document to DMS
DMSFILEOPEN
Opens document from ProjectWise by ODMA ID
DMSXREF
Inserts external reference
REFEDIT
Edits attached external references and blocks
8.9.3
XOPEN
Opens the selected external reference for editing (Checked out of PW)
PLOT
Plot active file directly into ProjectWise
DMSPROPERTIES
Shows dialog with DMS properties
DMSIMAGE
Inserts image to drawing
DMSOFF
Disables ProjectWise integration
DMSON
Enables ProjectWise integration
DMSTB
Initializes titleblock support
DMSINIT
Initializes ProjectWise integration (generally is executed automatically)
DMSREFRELOAD
Reloads references that are out of date
DMSREFCHECK
Checks to see if references are out of date and prompts to reload them
DMSSET, DMSSETVAR
Sets a ProjectWise integration variable
DMSFILEINIT
Initializes integration from a file which is opened by another application
DMSPROFILESET
Sets AutoCAD profile
8.9.2
DMSINSERTREADLINE
Inserts redline document
TBUPDATE
Updates titleblocks in drawing with the data in ProjectWise
TBUPDATEDMS
Updates data in ProjectWise with the content of the titleblocks in drawing
TBINSERT
Inserts titleblock in the drawing
TBUPDATEONOPEN
Performs titleblock update on document open
TBAUTOUPDATE
Updates titleblocks in the drawing, based on titleblock data in ProjectWise (used by the Attribute Bulk Update tool)
TBAUTOUPDATEDMS
Updates data in ProjectWise with the content of the titleblocks in the drawing (used by the Attribute Bulk Update tool)
OPENSHEETSET
Allows to open sheet set from ProjectWise
8.11.5
NEWSHEETSET
Allows to create new sheet set from ProjectWise
IMAGEATTACH
Allows to attach image from ProjectWise
8.9.4
DWFATTACH
Allows to attach DWF from ProjectWise
DGNATTACH
Allows to attach DGN from ProjectWise
DMSSESSIONFILEMANAGER or SFM
Displays Session File Manager dialog
DMSPLACEONSHEET
Executes 'Place on sheet' Sheet Set Manager command
DMSIMPORT
Performs integrated AutoCAD import operation
DMSREFATTACH
Registers attached reference on the ProjectWise Integration server Use if the attached reference document exists in ProjectWise but was attached in a non-integrated manner
DATALINK
Attaches a datalink from ProjectWise
DATALINKUPDATE
Updates an attached datalink Integration of this command works only when the datalink is reloaded from ProjectWise
Product TechNotes and FAQs
ProjectWise TechNotes And FAQs
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!