Single rebar distribution

Hi Hoa,

Please go through this attached video in the link.

https://bentley.sharefile.com/d-s4c22930f6d442fa8

The workflow followed here

1. Using FBRM, extracted faces and then using Associative Intersection, created guide lines which are following the curvature.
2. Then used Irregular Dispatch method to place the Stirrups.

However using Single Rebar distributoion is good when there is straight path.

Hi Hoa,

Please go through this attached video in the link.

https://bentley.sharefile.com/d-s4c22930f6d442fa8

The workflow followed here

1. Using FBRM, extracted faces and then using Associative Intersection, created guide lines which are following the curvature.
2. Then used Irregular Dispatch method to place the Stirrups.

However using Single Rebar distributoion is good when there is straight path.

Hi Sandip Kar,

Thank you for video. 

Can you make more video to create main bar for this beam.

Best regards,

Hoa

Hi Hoa,

Hope you are doing well. Sorry for my late response. I have created a short video explaining how to create Longitudinal Bars and Stirrups in a curved block following the curvature. Hope this will help you to get more clarity on how to achieve this kind of reinforcement.

Creating Reinforcement in a Curved block

By Sandip Kar over 3 years ago in ProStructures > ProStructures Files

Dear Sandip Kar,

Thank you so much I will try and feedback to you