I have a concrete deck, the deck is curved and slopes in two different directions. When using ProConcrete Signle RebarSet I am defining the curved sloped outline for the bars but the bars are not following the cross slope of the shape, see image attached. As you can see from the image the rebar starts off on the shape and does follow the outline with respect to the length of the rebar but does not follow the slop. The curved shape of the outline seems to effect the bar locations. If I have a shape without the curve the rebar seems to follow the shape and slope better. Even when the curve is defined by vertex points the rebar still does not follow the slope of the shape sometimes.
Regards,Sandip KarProduct Engineer - Bentley Systems
This is the model I am working on. There are a number of construction lines involved. But I would like to see how to use Irregular Dispatch to get the transverse bars in this curved, skewed, and sloped deck. The link below should allow you to download the DGN.
outside.vermont.gov/.../s12j658_BR48_RebarPC4_IrregDispachExample.dgn
Mike LongstreetVermont Agency of TransportationCivil Engineering Technical SupportVTCAD Help