Tank Volume Calc.

Hello Erkan,

Thanks for posting your query over the Bentley Community Forum.

We are investigating on your attached file and will revert soon.

Regards,
Alistair Lobo

when will i be informed

Hello Erkan Eymur,

Thanks for your follow-up regarding your query over the Bentley Community Forum.

As per my investigation of your working file, I understand that you wanted to get the concrete volume of your modeled concrete. And, I found out that you are working with a "Parametric Revolved Surface", not a "Parametric Solid". Therefore, this results in getting a model with a hollow fill. This is why you are getting a Zero value concrete volume.

To validate this on your end, drop element by using "Drop Complex Status". Then, go to Properties. You can see that it is modeled as Revolved Surface and under Geometry, you will notice that you are only getting Surface Area, and no Volume data.

You may find the Drop Complex Status option here.

Therefore, I would recommend you to create your model as Parametric Solid by using Revolve option under Modelling workflow > Solids menu > Create Solids ribbon.

I hope this helps you. If you have any doubts or other inquiries, please feel free to raise a Service Request.         

Regards,

Kemuel Jancorda
Technical Support Engineer