Hi,
We are currently having a few issues with the Detail Centre Express in ProSteel V8i_S3, below I’ve summarised what is occurring. Any help would be appreciated.
Express details insert onto drawings (Using Single sheet optimised for scale) at scales per the scale file.When updating through detail centre if scale chosen by express does not match the scale shown in the detail style then ‘2D Update’ will cause detail to change size on drawing to the scale in the detail style.Is it possible for the ‘2D Update’ to ignore scale of the detail style or is it required to have a detail style for each scale in the scale file.
Thanks, Kurt.
Have you tried to tick in "do not scale parts" in the detail style?
We have tried ticking "do not scale parts" but this still results in the same problem.
For example, the express detail center selects a scale of 1:5 which goes onto the drawing fine, when updating the inserted member it then increases back to a non scaled size.
Update 2d Drawing has always used the scale set in the detail style rather than the scale of the sheet.
if you want to update drawings you have to check the scale of the sheet and change the detail style before updating each drawing.