Hi can anyone please assist.
The bolting tool does not seem to be working
I am trying to bolt two shapes togerther with a 10mm bolt after drilling holes with the drill tool
I am getting this message? Not sure what "Out of Dim=1" means??
Thanks
Ross
Hi Ross,
We have tried to bolt between two angles. It is working fine.
The bolting is applied at drilled holes.
This messege means that system found two drills but it can't recognize those drills due to some dimension issue, may be the Workloose is more than 1. The gap between two angles is more than 1. Go to this Wiki link. Hope your issue will be resolved.
https://communities.bentley.com/products/prostructures/w/structural_drafting_and_detailing__wiki/8294/bolts-can-not-be-placed-in-holes
Also We have attached the snapshot what we have created here.
We suggest you try once and let us know if any further issue is there
Thank you.
Regards,Sandip Kar
Regards,Sandip KarProduct Engineer - Bentley Systems
Answer Verified By: Ross Clarke
Thanks Sandip,
I was able to adjust the database and now my bolting is working correctly
Thanks Ross for the update.
We are very happy to know that the issue is resolved.
Please feel free for any new issue or concern.
Regards,
Sandip