In the first screenshot, you will see that I am attempting to cut an opening into the top flange of the beam, using the Polycut as shown. I only want to cut the top flange. In the second screenshot, this shows the Shape Properties, and the cut is obviously not shown graphically. The profile of the cut I want, is shown in orange, whereas the cut profile according to the Shape Properties is shown in red, but the cut is not evident or shown correctly. Of note: When I cut the part using the "Complete" setting in the POSITION box, it works just fine...but I don't want to cut the full beam, just the top flange!
Current version: ProStructures Connect Edition Update 5 - Version 10.05.01.11
I have used this tool hundreds of times in ProSteel SS10 and older versions, without any issue. This tool is much faster than using Notches to do the same thing. I have checked every conceivable setting, config variable and attributes setting and cannot seem to find the fix. Any help would be appreciated.
Thanks
And now I see that for some reason the images were flipped when I hit the Post button. Those who are familiar with what I am attempting to show will get the idea...I hope!
Hello Frank, it would be kind if you can attach your drawing for further clarity. Many Thanks. As said by you the options besides the non-complete cut option do not seem to give correct results. And notches are too slow for you as you say.
Bentley Structural YouTube Channel
Bentley Technical Support
Johannes Michalowsky
User Success Support - Bentley Systems
ServiceRequest Manager
The drawing size is fairly large, and does contain company specific information that I am not at liberty to share at this time.
As my post indicates, the Polycut by Polygon tool, using the "top-half" or "bottom half" POSITION does not work correctly in ProStructures Connect Edition.
My feeling is, this tool (or at least one aspect of the tool) isn't functioning as it should, and I am wondering if anyone else has experienced this issue, or if Bentley is aware and has it planned as a "bug fix" in a forthcoming update?
Thank you,
Maybe you can make a copy of the drawing, make the drawing empty and paste this element in the same place. This should be normally enough to replicate. It could be related to drawing settings or units of the resolution, swa as Dominik says, or other various reasons. As also for you it happens the first time in years, we would have a double check to fully confirm it's solved in our latest update.