How to model polyplate bottom face with 4 different elevation and top face at same elevation
Hi Shrinal,
I have received your file. Please allow sometime for us to check on this and we will revert soon.
Regards, Alistair Lobo
Thanks
You could do this using a thick plate and trim at line
set the plate thickness greater than the finished part
Set your UCS to the plane of the cut and use "cut part at line" to trim the plate at the angle you need
Thanks Mike the option you sent is working. What I can see in your snap is all four corner are at different elevation that what I need but while I am doing so. first I cut the part at first line results the other 2 opposite corners also cut with same difference. So I am not able to get result what you shown in snap.See below I attached the snap for understanding. I tried for next side line of the part but result doesn't come.
you should be able to do the cut in one process. Its hard to tell from your screenshot but looks like the UCS is not rotated to the cutting plane.
Use '3 point UCS' to rotate the UCS to the plane of the cut first
The Z-X axis defines the plane you will cut on, so it must be rotate at the cut angle you need.
Thanks Mike for your elaborated part on UCS. now I am able to do cut the plate as required. Many thanks to you.