Hi,
With the NC1 data file, how do we make the AK values all have 7 columns of data (even if they are just 0.00) - refer below sample.
also attached the sample NC1 data file we need to achieve.2rhs-5_0.zip
Note : this has been the comment from a fabricator "missing face values e.g. AK- O, AK – H and AK – U must all be represented in the nc1 file"
Hello Brian,
Thanks for posting your query over the Bentley Communities Forum.
Please allow us sometime to check on this issue. Also, if you require more prompt assistance on this, we recommend you to please log a Service Request for the same. You can follow the below Wiki for guidance on how to log a New Service Request -
Regards,Alistair Lobo
Hello Alistair, Any news/update about this? TIA
Hi Brian,
As per the communication we had in the service request (SR#7001391720), the 0.0 fill in data is not required for the AK values in the NC data output.
Kind Regards,Vyanktesh NamaSenior Technical Support Engineer Bentley SystemsBentley Structural YouTube ChannelBentley Technical Support