I'm running into an issue in ProStructures when creating a 2D sheet from the Detail Center. In my preview the object displays correctly, but when I "Insert 2D" my MC channels are displaying incorrectly. Has anybody experienced/resolved this issue? I've only noticed this issue on my MC channel so far, in this case it's MC10x33.6.
I've tried recreating the 2D sheet a few times and restarting the program, but haven't had any luck.
Channel in preview:
Channel on sheet:
Hello Curtis Mcguffee,
Thanks for posting this query in Bentley Community Forum.
I cannot comment anything at this moment without visiting the model. Could you please send us the model so that we can look into this and see if there is any cut existing?
Regards,Sandip KarProduct Engineer - Bentley Systems
Thanks for reaching out.
I attached the dgn. This is occurring in the "ST-1 - 138KV 3-PH LOW BUS SUPPORT" model. I have the details split up by part families, this one is in the "Channel" part family.
ST-1 - 138kV 3-PH Low Single Insulator Bus Support.dgn
I have tested this issue and it is replicable when we insert channel part drawing in the 2D Design Model.
But the same drawing when we insert in the 3D Design Model then the drawing is displaying correctly, please refer to the below image.
We can understand that this should also work correctly in the 2D Design Model. So, we request you to please raise a service request for this issue so that we can log this issue in our system on your behalf. For more information on how to raise a service request, please follow the below wiki link.
Kind Regards,Vyanktesh NamaTechnical Support Engineer - ProStructures Bentley SystemsBentley Structural YouTube ChannelBentley Technical Support
Thanks Vyanktesh! I'll just use these in 3D models for now, thanks for finding a work around for this. Service Request # is 7001432278.
Unrelated question.. what is the software you use for screen shot and mark-up? It looks nice!
AutoCAD 2017 - N 402.0.0 SP1.2ProSteel S6 - 08.11.11.207Australian LocalisationWindows 10 64bit
We use SnagIt software to capture the screen shots and edit the images. It's really a nice software.