When creating a new drawing my sheet is displayed in an unusual 3D projection.
There does not seem to be any particular reason for this.
It has happened in all my ProSteel projects so far.
I simply Edit the style.
Change thew alignment to anything else, the views are immediately displayed correctly albeit in the wrong alignment.
I switch the alignment back to the original setting again and the view is displayed correctly. I must do this each component.
I have also saved a new Style definition after this process. To no avail.
Is something I am missing? Help!
This happens when you are in any shaded modes. (UCS has fat lines). If you are in wireframe mode the initial display will be correct.
Please switch before insertion to wireframe mode.
Best Regards
Bentley Structural YouTube Channel
Bentley Technical Support
Johannes Michalowsky
User Success Support - Bentley Systems
ServiceRequest Manager
Answer Verified By: Andrew Cairns
Ok ... thank you.
I made sure my model visualization was set to "2D Wire Frame" before opening the 2D Detail Center.Now, when the "Preview Window" was opened it was displayed correctly. Thanks for the help!