Hi,
I noticed a problem with NC files created from round tubes with holes dirlled in them.
This is what element looks like in the model:
And this is what I get in NC data:
The holes position (red marking) suggests, that these are dimensions after unwrapping the round tube to plate. However, header (violet) describes this part as a round tube.
The result is, that CNC machine displays the element as a round tube and applies the holes according to "unwrapped" dimensions.
I think, either the holes need to be dimensioned as for the round tube (not unwrapped) or the header need to be set as "B" for plates (but then I think the whole profile name should be renamed as for plate).
How to fix this issue?
We need proper NC files for round tubes with holes in them.
Autocad 2016 SP1
Prosteel: 08.11.11.207
(The same is on Autocad 2014/PS 8.11.11.55)
Hello Tomasz Surmacz,
Thanks for posting this query in Bentley Community Forum.
We are looking into this and will come back to you.
Regards,Sandip KarProduct Engineer - Bentley Systems
Hi Tomasz,
We have investigated further and found this is a Defect. We are going to report this issue as Defect.
Can you please log a Service Request on this issue so that we can link this Defect to SR to get good impact to fix further? Please refer following link to log Service request.
Hi Sandip,
Can you please advise which version of PS can be use so that NC file is defect free?
Best regards,
Tuan Le
Service request has been created. Please fix this issue as soon as possible.
If temporary solution, like for example, changing some program libraries, configuration files, presets, etc., is possible, then we can do it by ourselves. Just provide files and instructions.
Thanks Tomasz for creating the Service Request.
We have already logged the Defect and now we will prioritize this by linking this SR to the Defect.
I think what Tomasz meant is what can we do in the mean time?