Pin diameter in *.lst file

I'm using version ProStructures Connect Edition Update 1 Version 10.01.00.23.

Were trying to understand how the program is inserting Pin Dia. in our *.lst file.

I’ve attached our pdf copy of output. Can't attach *.lst file as there's error to attach.

Pin dia is set to PinDiaStart1.

Bar 1527 & 1529 were placed using guidelines ( 2 guidelines then 3) and then using the single rebar distribution.

So these bars would not have any end conditions.

Doesn’t the program then use what is setup in our Rebar Codes for pin dia info?

In the attached file you will see the program has place some Pin Dia. and some none,

yet the placement method was the same.

 

Should we be using a different method for placement so as to get the Pin Dia?

Bar 1527 & 1529 were placed using guidelines ( 2 guidelines then 3) and then using the single rebar distribution.

So these bars would not have any end conditions.

Doesn’t the program then use what is setup in our Rebar Codes for std pin dia info?

In the attached file you will see the program has placed some Pin Dia. and some none,

yet the placement method was the same.

 

Should we be using a different method for placement so as to get the Pin Dia?

 session 14 f.pdf

Parents Reply Children
No Data