In order to plot a large number of drawings (e.g. singleparts) you might want to use the Batchplot-feature.
Prepare the format file (frame DWG)
Open the required frame DWG, start the plot dialogue in the model area, edit your adjustments incl. plotstyle (1);
save it as Setup with any name (2); execute on the present layout (3). Save the frame DWG this way.
Now start the Detail Center Express on your model; it creates the desired (singlepart-) drawings.
Then start the batchplot via AutoCAD/ File/ Publish.
Delete all entries here in order to load a new batch of drawings.
Exclude the layouts (1) and add the drawings via +button (2). It is important that there are no errors shown beneath "Status" (green check mark); this should be warranted by step 1. Finally start the batchplotting by clicking the button "Publish" (3).
Product TechNotes and FAQs
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!