When a connection between two elements was a created using an automatic connection it creates a logical link. However, if an element is created manually and grouped to another there is no logical link created between them. To manually create a logical link please see procedure below.
A column which got a Baseplate and a Gusset plate. The baseplate was created using an automatic connection. While the gusset plate was created manually. See the screenshot below only showing a logical link between the baseplate and the column.
2 .Launch the PS_Manual_Cut command
3. Prompt: Select the connected part of the Manual Link: (Select the gusset plate)
Prompt: Select the Main part of the Manual Link: (Select the Column)
4. The Manual Link has now been added to check it, go into the shape properties and you should see an additional logical links added.
Product TechNotes and FAQs
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!
Prompt: Select Main part of the group: