Applies To | |||
Product(s): | ProSteel 3D Professional | ||
Version(s): | All | ||
Environment: | Windows 7 64 bit | ||
Area: | General | ||
Subarea: | |||
Original Author: | Roger Belen, Bentley Technical Support Group | ||
Grouping elements together within Prostructures is an important procedure. This will come handy when you are generating your 2D Structural drawings needed for fabrication.
Sometimes and when modelling within ProStructures you would need to Delete the entire "Group" or just dissolve an existing "Group".
1. To Dissolve an existing Group. Open the Administrate group command, then go to the Group TAB.
2. Select the Dissolve Group ICON
Prompt: Select part of the group: (Select any part of the group)
A Dialog will appear "Do you really want to dissolve the group?"
Click the Tick button to confirm of the cross mark to cancel.
The Group will then be Dissolved but not deleted if you click the tick mark.
1. To Dissolve an existing Group. Open the Administrate group command, then go to the Group TAB.
2. Select the Delete Group ICON
Prompt: Select part of the group: (Select any part of the group)
A Dialog will appear "Do you really want to dissolve the group?"
Click the Tick button to confirm of the cross mark to cancel
The Group will then be Deleted if you click the tick mark.
Bentley Technical Support KnowledgeBase
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!
Prompt: Select Main part of the group: