Start the ProSteel shape dialog.

In case you don't see the shapes you need you can change the visible
shape classes.

1.On the page Straight Shapes select Standard
2. From the list choose DIN_HEB
3. Shape size is HE200B
4. In the grapics field on the right hand side select the center point as insertion point
5. Insert the shape at line. Click the view frame line for the first column.



After clicking the line the shape will be displayed. Now it is possible to change the angle by:
- right mouse click (endless)
- dialog + or -
Now two times left click for confirm position and end shape insertion.

Before inserting the next shape you need to close the dialog or end the connection to the last
inserted shape. Otherwise the dialog is still connected to the last inserted shape(s) and any
change in the dialog will also change the shape(s).

For the roof and the other column the shape type is IPE 240 and inserted at upper center point.




Now the consturction should look like this: