You are currently reviewing an older revision of this page.
ProSteel weight is not shown in the Partlist and ProSteel properties
The reason for this is because no Material was selected when the element was inserted.
Go to the ProSteel Properties of the element. Partlist Data > Data > Select the Material
2. Under the Values Tab check if the weight is shown. (if not toggle the Vol.weight option) once the weight is shown leave the Volume weight option disabled.
3. To update the Partlist. Double click on the Partlist > the Partlist Dialog box will show up > Go to Content Tab > Recalculate the display of the Partlist
Product TechNotes and FAQs
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!