You are currently reviewing an older revision of this page.
ProStructures V8i (SELECTseries 8 Update 2) maintenance release includes important fixes and updates for ProSteel and ProConcrete since ProStructures V8i (SELECTseries 8 Update 1)
some of the main fixes are:
ID
Title
654828
Bars are added to BarFactory with correct Length and Bend Lengths.
658285
Stock length is considered when Staggered Lap calculation is performed
658292
658304
689596
696026
696531
702727
Improvements to NETWRAPPER rebar functions
658874
T-head rotation functionality added.
659065
First, last pre-set Vary set labels are supported
665088
US Survey feet and inches are supported by ProConcrete
665092
Cached drawings are working with Rebar graphics and labels
665097
$bs Shape code is supported in label
672343
Reporting cut and theoretical lengths is not affecting weight value
678394
%KATALOG% placeholder works in rebar tooltips.
678586
in drawing partlist on 2D drawing does update from the DetailCenter
682321
beam cardinal points are maintained for steel models from Revit through ISM import to ProStructures.
684414
RebarSet with negative EC offset are detected by Vary Set.
685604
Rebar labels locations are maintained when switching between design model and drawing model
686983
Delete End Condition does remove the EC from Lapped bars
686998
Continuous Footing rebars are retained when the footing concrete is placed with corner justification.
694232
Stock Length of straight bars are amended in the British rebar code (BS8666:2005)
699404
All Tags are retained when switching between models and drawings
699409
Moving or changing clip volume in Dynamic Views works correctly in all cases
699957
desired results are achieved when using the 'Override Tail' end condition option on bends less than 90 degrees.
700335
Correct cut values for all cases are reported in the NC output.
700691
End Prep Holdback field can be accessed without selecting an end prep.
705991
Fixes in British rebar code BS8666:2005 for bend shapes
705996
U-Bars (ACI shapes 'S11' and 'S12') are positioned correctly.
706033
Sloping bar with adjacent sloping legs on one or both ends are calculated correctly
706040
Reported VarySet Shape issues fixed
707229
IFC Export works with restricted user rights
720411
Standee Rebar persists on original level when modified
720457
dot bars maintain their location when MDOT is set to 1
720559
Managed shapes are displayed correctly in Rebar bend shape configuration dialog
721870
SHAPECLASS_EDGESTEEL is added to NC-DSTV
721921
RO & RU profile AK block is reported correctly in all cases
722654
EC Offsets is considered upon Length adjustment of Vary Bars
722656
Vary Sets in KsRebarSet has now a minimum Vary Amount
722657
The comRemoveAllRebarBarMarks is removing marks from bars that are on OFF levels.
728731
Dot bars re-symbolizes correctly
731186
connection drawing box Z value is correctly calculated
731947
Beam longitudinal bars that aren't corner bars react correctly when wrapped by stirrups
732524
Barmarks are correctly assigned to different lengths of bars.
738596
Most recent RDX file version is supported.
739281
Multiple cuts at same end are reporting a miter angle