You are currently reviewing an older revision of this page.
In this document, we are going to learn how to display various parameters of steel and rebar in the tooltip.
Please follow the below steps to achieve this.
1. Go to the following path and copy the tooltips.ini file on desktop because files under Program Files are write protected.
Path: C:\Program Files\Bentley\ProStructures CONNECT Edition\ProStructures\Default\appl\Data
2. Open the copied tooltip.ini file. In the below image you can see the default Display of the various parameter for ‘Display’ and ‘RebarDisplay’. Display is basically for steel elements and second one RebarDisplay is for rebar elements.
3. There are two ways to define the display of tooltips. See the following examples.
i. \n%LABEL – POSNUM% %POSNUM%
By using this syntax, the default name of the above parameter will display in the model and these default labels are provided for only the more commonly used properties.
ii. \nAreaClassName=%AREACLASSNAME%
By using this syntax, you have the ability to display the required parameter of your choice. In the above example ‘AreaClassName’ will be displayed in the model for AREACLASSNAME property. You can give any name for example.
\nAreaClass=%AREACLASSNAME%.
4. In the same way you can display the rebar parameters also.
5. After customizing tooltip file save and close, then copy and replace this file in the save location from where we have copied this.
6. Now, launch the ProStructures application and place any element, hover over on that element and you can see the newly added display tooltip.
In this manner, we can add our required parameters in the tooltips file to display those in the model.
How to customize plate labels from the Plate Description File in the ProSteel CONNECT Edition?https://communities.bentley.com/products/prostructures/w/structural_drafting_and_detailing__wiki/47491/how-to-customize-plate-labels-from-the-plate-description-file-in-the-prosteel-connect-edition
How to customize plate thicknesses from the Plate Thickness Table File in the ProSteel CONNECT Edition?
https://communities.bentley.com/products/prostructures/w/structural_drafting_and_detailing__wiki/47540/how-to-customize-plate-thicknesses-from-the-plate-thickness-table-file-in-the-prosteel-connect-edition
Activate Part Description Level in modelinghttps://communities.bentley.com/products/prostructures/w/structural_drafting_and_detailing__wiki/42010/activate-part-description-level-in-modeling