ProStructures V8i for AutoCAD SELECTseries 3 Update 2 (08.11.03.55)

The ProStructures V8i Update installation to the version 08.11.03.55 supports 32 bit and 64 bit AutoCAD.

The update is for all 08.11.03.xx versions.

The following issues have been fixed / enhanced:

• Roof-Wall Panel dialog aborded when a comma was used instead of a decimal point
  
  
• Countersunk bolt heads haven't been displayed correctly in shaded mode when using DINBolts.mdb (SCH7991)
• Wrong values for countersunk bolts in DINBolts.mdb tables have been corrected
• Incorrect alignment of inner and outer contours of unfolded hollow square and rectangular shapes have been fixed.
  
  The unfolding of the inner and outer contour overlap. The outer contour should be outside of the inner contour, as projected to the beam-axis which is giving the correct outer and inner relation of the unfolding contour.
  This means:
  The inner and outer contour haven't been aligned correctly.
  
  
• If the latest version of Adobe Reader version X is installed, the help document have been started up to 9 times from the ProStructures dialogs. This issue has been fixed.
• Group EEDs has been fixed
  
  
• There was a problem in positioning groups with settings for groups on max.+1. When a numbering was performed and you did another routine (two different sets of groups in one drawing to number) without setting the starting index back to '0', then the numbering should continue at the last found number. That went wrong. It started over again at '1'.
• BOM command seamed to crash AutoCAD , when processing large quantity of parts. Behavior has been fixed.
• Partlist is now working when system language is Hebrew
• In drawing partlist value for paint area etc. haven't been filled with zero, whenever the value has been less than 1
  
  
• Presort positioning for flat steels is now working correct
• Weld symbols have been at the wrong location in the standard installation.
  Now all weld symbols are available
• Not all weld symbol bitmaps have not been displayed
• The Roof-Wall dispatch dialog terminated unexpectedly.
  If you have created the Roof-Wall structural object, and you have selected the polycut tab, inserted a polycut first of all the property page got closed, but not the Roof-Wall dispatch tab, and the command terminated if the "X" in the upper right have been used to close the dialog.
  
  
• ProSteel dispatch command displayed several warning messages when a wrong MDB database file have been selected.
• Partfamily dialog became unstable when entering a value larger than 66 for “Number of Part Families“
• If the dialog of the appearing drawings information have been canceled during the part-list creation, the whole process broke and the partlist data has not been delivered
• Installer did not detect if AutoCAD was running during the installation process
• In the command PS_CREATE_ACIS answering the question "Do you want to delete the Original Parts from the converted ACIS Parts, if not, they will just be hidden? No<Yes>" by pressing the enter button didnn't lead to erased KS_SHAPES; instead they got erased by typing "Y" and enter.  The default setting has been changed
• Clipping plane dialog box didn't show the correct tooltip
• Cloning of end plate connections using the connection editor did not react correctly.
  Cloning of an end plate connection by using the connection editor caused that not all links have been updated. I.e. the link arrows "switched" into the opposite direction. For all these end plate connections the data has been correct, but but the size of the end plate has been wrong.
• NC Data reported the wrong web cut angle value when using the option "Straight End as Shape Start"
  
  
• In 2D, facet modification moved in certain cases at the wrong edge.
  I.e. a facet of a subpart "rotated" clockwise if the scale 1/5 has been selected
  
  
• ProStructures preview stopped working with models contained invalid holes
• ProStructures crashed with fatal error message in group containment dialogbox
  Go to ProStructures >>Additions>>Group containment list>>Select Drawing
  In Group Containment window select Layout Tab>>Click on magnifier glass which is in bottom left side>>In format Dialog Click “Moves the selected entry one down” tab
  Result: ProStructures crashed with fatal error message.
• In a few cases the Mexican and AISC Metric database weight calculation didn't match with the IMCA specifications:
  
  - Wrong value for imperial threaded rods in metric models
  - Wrong weight calculation of threaded rods in metric drawings
  - Wrong weight calculation for imperial bolts in metric drawings
  - Wrong AISC shapes  weights in metric database
  
  Fixes:
  - Changed AISC Metric database
  - Changed weight calculation for threaded rods
  - Changed weight conversion for imperial bolts in metric drawings
  - Changed offset value in threaded rods for imperial bolts in metric drawings
• When a U-shape with a hole in one of the flanges got mirrored and the size of the U-shape got modified, the holes got "invisible", but the properties still contained them.
  
  Web Holes vanish when mirroring shapes